ब्लॉग
- सभी
- एल्यूमीनियम मिश्र धातु
- एल्युमिनियम डाई कास्टिंग
- एनोड किए गए
- ऑटोमोटिव पार्ट्स डाई कास्टिंग
- त्रिसंयोजक क्रोमियम रूपांतरण कोटिंग साफ़ करें
- सीएनसी मशीनिंग
- अनुकूलित मिश्र धातु
- ई कोटिंग
- उच्च दाब डाई कास्टिंग
- IATF16949
- उद्योग गाइड
- ISO90001
- रिसाव परीक्षण
- प्रकाश पुर्जे डाई कास्टिंग
- मैग्निशियम मिश्रधातु
- मैग्नीशियम डाई कास्टिंग
- निर्माता निर्देशिका
- समाचार
- चमकाने
- पोस्ट मशीनिंग
- पद प्रक्रिया
- पाउडर कोटिंग
- तीव्र प्रोटोटाइपिंग
- रेत विस्फोट
- शॉट नष्ट
- उपकरण और डाई बनाना
- उपकरण सामग्री
- वैक्यूम डाई कास्टिंग
- जिंक डाई कास्टिंग
Magnesium Alloy Grades Explained: AZ91D, AM60B, AS41B for Die Casting
Compare AZ91D, AM60B and AS41B magnesium alloys by composition, ताकत, लचीलापन, heat resistance and die-casting applications.
Magnesium Alloy Corrosion Protection for Harsh Environments
Magnesium alloy corrosion protection depends on proper surface treatment, coating selection, galvanic isolation, and testing for harsh environments.
कस्टम एल्यूमीनियम मिश्र धातु विकास: विशिष्टता से लेकर उत्पादन तक 8 हफ्तों
A319 aluminum alloy sits between stock grades and custom development. Walk the eight-week spec-to-production plan, its verification gates, and when to abort.
अनुकूलित मिश्र धातु क्या है और खरीदारों को इसके लिए कब अनुरोध करना चाहिए?
A customized alloy can mean a drawing note or a full development program. Four levels, what each element buys, and when to ask for one.
एनोडाइजिंग बनाम पाउडर कोटिंग: एल्युमीनियम डाई कास्टिंग के लिए भूतल उपचार चयन
Anodizing vs powder coating for aluminum die castings: how silicon mottling, film thickness, masking and drawing calls decide the right finish.
एनोडाइजिंग डाई कास्ट एल्युमीनियम: उच्च-सिलिकॉन मिश्र धातुओं के लिए चुनौतियाँ और समाधान
Why ADC12 and A380 silicon blocks anodized color on die cast aluminum, and the porosity, मुद्रण, and alloy countermeasures that hold in production.
ऑटोमोटिव हार्डवेयर के लिए जिंक डाई कास्टिंग: आईएटीएफ 16949 आवश्यकताएँ खरीदारों को अवश्य सत्यापित करनी चाहिए
Verifying zinc die casting suppliers against IATF 16949 scope, पीपीएपी, छठे वेतन आयोग, and chemistry control, the checks automotive buyers must run.
ई-कोटिंग बनाम पाउडर कोटिंग: संक्षारण संरक्षण और लागत तुलना
E-coating vs powder coating compared on film thickness, कवरेज, रंग, corrosion testing, and cost drivers for aluminum die cast parts.
Type II vs Type III Anodizing: Hard Coat Anodize for Wear-Resistant Applications
Type II vs Type III anodizing compared on film thickness, कठोरता, tolerance growth, and behavior on high-silicon die-cast aluminum.











